Modem Installation

Alcatel Speed Touch USB

Before you connect the Speed Touch USB modem to your computer please make sure that you have installed the driver software for the modem.

Connect the telephone line cable to the socket on the Speed Touch USB cable as shown in the figure below.

Τοποθετήστε το άλλο άκρο του καλωδίου στην τηλεφωνική πρίζα.

Insert the USB cable of the modem to the USB socket of your computer (see figure below). The USB socket is marked with following characteristic symbol:

As soon as the USB cable is inserted in the socket, Windows will recognize the “new hardware” and will update its drivers with those you installed already.


Connection to the Service Selection Gateway using the Speed Touch USB modem
The connection to the Service Selection Gateway where the internet providers are located, should be carried out using a dial-up connection.

To perform a dial-up connection the user has to create first the dial-up icon like the one shown here.

This icon could be created using the application “Make New Connection” that is located in the “Dial-Up Networking” folder which in turn is located in the “My Computer” folder on the desktop.
A wizard will help you during the process. You only have to press “Next” to advance. At the beginning of the process, make sure you choose “Speed Touch-Line0” at the “Select a device” field (as shown in the figure below).

Αφού δημιουργήσετε το εικονίδιο «ADSL Connection» κάνετε κλικ με το δεξί κουμπί του ποντικιού και επιλέξετε την εντολή «Properties». Σιγουρευτείτε ότι τα ακόλουθα σημεία στην κατηγορία «Server Types» είναι όπως φαίνονται πιο κάτω:

When the dial-up icon is created click on it using the right mouse button and activate the command “Properties”. Make sure that the following settings shown under “Server Types” card look like the ones below.

To connect to the Service Selection Gateway, double click on the dial-up icon.
A window as shown below will appear requesting user name, password and phone number.



The connection is now active and you may proceed with the connection to the service selection gateway using your browser.

back...